Senior Electrical Engineer, Wire Harnessing and Test Systems, Kuiper
Job Description
Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.We are hiring for an experienced Electrical Engineer responsible for ensuring electrical integrity across spacecraft harnessing systems, with a primary focus on test harnessing and a secondary support role for flight harnessing. This candidate will own the development, validation, and enforcement of harness design standards to mitigate issues such as noise, crosstalk, and unintended behavior.Key job responsibilities* Electrical Integrity Ownership: Lead analysis and mitigation strategies for signal degradation, transient susceptibility, and electromagnetic interference (EMI) in test harnesses and test systems; extend to flight harnesses as needed.* Grounding & Shielding Strategy: Define and validate grounding schemes (single-point, multi-point, hybrid) for test systems and shielding approaches for sensitive signal lines.* Harness Design Standards: Specify technical requirements for: * Shielded vs unshielded cable use * Twisted pair implementation * Low speed, high speed, and RF signals * Separation and routing guidelines for mixed-signal harnessing* Design Review Participation: Partner with flight and test engineering teams during early design phases to influence harness design and interconnects to ensure electrical signal integrity.* Failure Investigations: Serve as the go-to owner for root cause analysis (RCA) of test harness anomalies relating to electrical integrity, test harness and verification anomalies, and electromechanical test system.* Documentation & Compliance: Develop interface control documents (ICDs), block interconnect diagrams (BIDs), electrical schematics, test harnessing specifications, and a signal integrity standards library.
Locations
- United States, WA, Redmond, Redmond, WA, United States
Salary
Salary not disclosed
Estimated Salary Rangehigh confidence
150,000 - 220,000 USD / yearly
Source: ai estimated
* This is an estimated range based on market data and may vary based on experience and qualifications.
Skills Required
- - Experience in developing functional specifications, design verification plans, functional test procedures, and root cause investigationsintermediate
- - 5+ years of experience in design or systems architecture role working with wire harnesses and related test systems.intermediate
- - Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc.intermediate
Required Qualifications
- - BS degree in electrical engineering or equivalent. (degree in electrical engineering or equivalent)
- - Experience in developing functional specifications, design verification plans, functional test procedures, and root cause investigations (experience)
- - 5+ years of experience in design or systems architecture role working with wire harnesses and related test systems. (experience, 5 years)
- - Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc. (experience)
Preferred Qualifications
- - Master's degree in electrical engineering, computer engineering, or equivalent (degree in electrical engineering)
- - Experience in requirements definition and derivation using modelling, simulation and other analysis tools. (experience)
- - Experience in spacecraft or high-reliability electronics environments (experience)
- - Experience with harness design and testing methods (DWV, IR, NEXT, FEXT, TDR, VSWR, etc.) for complex systems (experience)
- - Experience with ECAD software KiCad, Altium, Expedition, and/or Mentor Graphics (experience)
- - Familiarity with MIL-STD-461, IPC/WHMA-A-620, or similar EMI and harnessing standards (experience)
- - Strong cross-functional communication skills with avionics, systems, test, and harness manufacturing teams (experience)
- Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site. (experience)
Responsibilities
- * Electrical Integrity Ownership: Lead analysis and mitigation strategies for signal degradation, transient susceptibility, and electromagnetic interference (EMI) in test harnesses and test systems; extend to flight harnesses as needed.
- * Grounding & Shielding Strategy: Define and validate grounding schemes (single-point, multi-point, hybrid) for test systems and shielding approaches for sensitive signal lines.
- * Harness Design Standards: Specify technical requirements for:
- * Shielded vs unshielded cable use
- * Twisted pair implementation
- * Low speed, high speed, and RF signals
- * Separation and routing guidelines for mixed-signal harnessing
- * Design Review Participation: Partner with flight and test engineering teams during early design phases to influence harness design and interconnects to ensure electrical signal integrity.
- * Failure Investigations: Serve as the go-to owner for root cause analysis (RCA) of test harness anomalies relating to electrical integrity, test harness and verification anomalies, and electromechanical test system.
- * Documentation & Compliance: Develop interface control documents (ICDs), block interconnect diagrams (BIDs), electrical schematics, test harnessing specifications, and a signal integrity standards library.
Documents
Tags & Categories
Senior Electrical Engineer, Wire Harnessing and Test Systems, Kuiper
Job Description
Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.We are hiring for an experienced Electrical Engineer responsible for ensuring electrical integrity across spacecraft harnessing systems, with a primary focus on test harnessing and a secondary support role for flight harnessing. This candidate will own the development, validation, and enforcement of harness design standards to mitigate issues such as noise, crosstalk, and unintended behavior.Key job responsibilities* Electrical Integrity Ownership: Lead analysis and mitigation strategies for signal degradation, transient susceptibility, and electromagnetic interference (EMI) in test harnesses and test systems; extend to flight harnesses as needed.* Grounding & Shielding Strategy: Define and validate grounding schemes (single-point, multi-point, hybrid) for test systems and shielding approaches for sensitive signal lines.* Harness Design Standards: Specify technical requirements for: * Shielded vs unshielded cable use * Twisted pair implementation * Low speed, high speed, and RF signals * Separation and routing guidelines for mixed-signal harnessing* Design Review Participation: Partner with flight and test engineering teams during early design phases to influence harness design and interconnects to ensure electrical signal integrity.* Failure Investigations: Serve as the go-to owner for root cause analysis (RCA) of test harness anomalies relating to electrical integrity, test harness and verification anomalies, and electromechanical test system.* Documentation & Compliance: Develop interface control documents (ICDs), block interconnect diagrams (BIDs), electrical schematics, test harnessing specifications, and a signal integrity standards library.
Locations
- United States, WA, Redmond, Redmond, WA, United States
Salary
Salary not disclosed
Estimated Salary Rangehigh confidence
150,000 - 220,000 USD / yearly
Source: ai estimated
* This is an estimated range based on market data and may vary based on experience and qualifications.
Skills Required
- - Experience in developing functional specifications, design verification plans, functional test procedures, and root cause investigationsintermediate
- - 5+ years of experience in design or systems architecture role working with wire harnesses and related test systems.intermediate
- - Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc.intermediate
Required Qualifications
- - BS degree in electrical engineering or equivalent. (degree in electrical engineering or equivalent)
- - Experience in developing functional specifications, design verification plans, functional test procedures, and root cause investigations (experience)
- - 5+ years of experience in design or systems architecture role working with wire harnesses and related test systems. (experience, 5 years)
- - Experience with setup, control and automation of lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc. (experience)
Preferred Qualifications
- - Master's degree in electrical engineering, computer engineering, or equivalent (degree in electrical engineering)
- - Experience in requirements definition and derivation using modelling, simulation and other analysis tools. (experience)
- - Experience in spacecraft or high-reliability electronics environments (experience)
- - Experience with harness design and testing methods (DWV, IR, NEXT, FEXT, TDR, VSWR, etc.) for complex systems (experience)
- - Experience with ECAD software KiCad, Altium, Expedition, and/or Mentor Graphics (experience)
- - Familiarity with MIL-STD-461, IPC/WHMA-A-620, or similar EMI and harnessing standards (experience)
- - Strong cross-functional communication skills with avionics, systems, test, and harness manufacturing teams (experience)
- Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site. (experience)
Responsibilities
- * Electrical Integrity Ownership: Lead analysis and mitigation strategies for signal degradation, transient susceptibility, and electromagnetic interference (EMI) in test harnesses and test systems; extend to flight harnesses as needed.
- * Grounding & Shielding Strategy: Define and validate grounding schemes (single-point, multi-point, hybrid) for test systems and shielding approaches for sensitive signal lines.
- * Harness Design Standards: Specify technical requirements for:
- * Shielded vs unshielded cable use
- * Twisted pair implementation
- * Low speed, high speed, and RF signals
- * Separation and routing guidelines for mixed-signal harnessing
- * Design Review Participation: Partner with flight and test engineering teams during early design phases to influence harness design and interconnects to ensure electrical signal integrity.
- * Failure Investigations: Serve as the go-to owner for root cause analysis (RCA) of test harness anomalies relating to electrical integrity, test harness and verification anomalies, and electromechanical test system.
- * Documentation & Compliance: Develop interface control documents (ICDs), block interconnect diagrams (BIDs), electrical schematics, test harnessing specifications, and a signal integrity standards library.