Production Technician (Technician 1)
Becton Dickinson
Production Technician (Technician 1)
Job Description
Job Description Summary
This role is a member of the Shift Team reporting to the Team Leader which supports the manufacturing activities, including operation of molding machines control panel, molding validation, record keeping and housekeeping.Job Description
1) Safety and ISO14001 Environmental accountability. Ensure a safe, healthy and environmentally friendly workplace by observing Company’s rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
2) Safety & health accountability: Safety and health are important to BD and we encourage the observance of all safety programs and training assigned to you. Such programs are to be attended in a timely manner to ensure that work tasks carried out are in accordance to our safety guidelines and SOPs.
3) Good Manufacturing Practice (GMP) accountability. Observing GMP rules and procedures.
4) Apply SOP and/or SWI in daily operations.
5) Observe BD Code of Ethics.
6) Reporting up on all incidents / accidents, near misses, deviations from plan and when required, to take part in further investigations.
7) Operate on machine/process units as assigned.
8) Perform troubleshooting for machine / equipment failures to meet production targets and quality standards and/or specifications.
9) Perform Preventive Maintenance (Cleaning, Service, Replace)
10) While operating on machine to perform tasks, always check and record the machine or process parameters and take containment and corrective actions if necessary to ensure that machine or process is under control.
11) Sampling inspection of parts as per Quality plan to ensure that the products are within specification. If out of specification, handle the disposition of non-conforming products as and when required by the Quality plan.
12) Support Team Leader to execute changes and projects within production area and ensuring compliance to EHS requirements, quality, cost and schedule.
13) Perform product/machine changeover on the line by clearing the previous lot parts, change of materials, tool/die change and minor machine set-up and keying in the necessary information into the machine MES satellite.
14) Coordinate with Manufacturing Assistant on the following tasks:
- Maintain housekeeping and cleaning of machine and work area to ensure neat, tidy and safe working environment.
- Accuracy in update of machine MES satellite e.g. correct component lot numbers, accurate shift output, waste and downtime.
- Manage Material handling activities which include packing/unpacking, loading/unloading.
15) Contribute into departments activities that are needed in order to achieve goals set for the department e.g.
16) Participate in the discussion and review of team's performance in the daily shift changeover meeting.
17) Participate in continuous improvement initiative / activities.
18) Perform any other tasks as assigned.
Required Skills
Optional Skills
.
Primary Work Location
SGP Tuas - Tuas PlantAdditional Locations
Work Shift
SG 12C (Singapore)Locations
- Singapore, South West, Singapore
Salary
36,000 - 54,000 SGD / yearly
Source: ai estimated
* This is an estimated range based on market data and may vary based on experience and qualifications.
Skills Required
- operation of molding machines control panelintermediate
- molding validationintermediate
- record keepingintermediate
- housekeepingintermediate
- observing Company’s rules and proceduresintermediate
- observance of all safety programs and trainingintermediate
- observing GMP rules and proceduresintermediate
- Apply SOP and/or SWI in daily operationsintermediate
- Operate on machine/process unitsintermediate
- Perform troubleshooting for machine / equipment failuresintermediate
- Perform Preventive Maintenance (Cleaning, Service, Replace)intermediate
- check and record the machine or process parametersintermediate
- take containment and corrective actionsintermediate
- Sampling inspection of parts as per Quality planintermediate
- handle the disposition of non-conforming productsintermediate
- execute changes and projects within production areaintermediate
- ensuring compliance to EHS requirementsintermediate
- Perform product/machine changeoverintermediate
- change of materials, tool/die change and minor machine set-upintermediate
- keying in the necessary information into the machine MES satelliteintermediate
- Maintain housekeeping and cleaning of machine and work areaintermediate
- Accuracy in update of machine MES satelliteintermediate
- Manage Material handling activities which include packing/unpacking, loading/unloadingintermediate
- Participate in continuous improvement initiative / activitiesintermediate
Responsibilities
- Safety and ISO14001 Environmental accountability. Ensure a safe, healthy and environmentally friendly workplace by observing Company’s rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
- Safety & health accountability: Safety and health are important to BD and we encourage the observance of all safety programs and training assigned to you. Such programs are to be attended in a timely manner to ensure that work tasks carried out are in accordance to our safety guidelines and SOPs.
- Good Manufacturing Practice (GMP) accountability. Observing GMP rules and procedures.
- Apply SOP and/or SWI in daily operations.
- Observe BD Code of Ethics.
- Reporting up on all incidents / accidents, near misses, deviations from plan and when required, to take part in further investigations.
- Operate on machine/process units as assigned.
- Perform troubleshooting for machine / equipment failures to meet production targets and quality standards and/or specifications.
- Perform Preventive Maintenance (Cleaning, Service, Replace)
- While operating on machine to perform tasks, always check and record the machine or process parameters and take containment and corrective actions if necessary to ensure that machine or process is under control.
- Sampling inspection of parts as per Quality plan to ensure that the products are within specification. If out of specification, handle the disposition of non-conforming products as and when required by the Quality plan.
- Support Team Leader to execute changes and projects within production area and ensuring compliance to EHS requirements, quality, cost and schedule.
- Perform product/machine changeover on the line by clearing the previous lot parts, change of materials, tool/die change and minor machine set-up and keying in the necessary information into the machine MES satellite.
- Coordinate with Manufacturing Assistant on the following tasks:- Maintain housekeeping and cleaning of machine and work area to ensure neat, tidy and safe working environment.- Accuracy in update of machine MES satellite e.g. correct component lot numbers, accurate shift output, waste and downtime.- Manage Material handling activities which include packing/unpacking, loading/unloading.
- Contribute into departments activities that are needed in order to achieve goals set for the department e.g.
- Participate in the discussion and review of team's performance in the daily shift changeover meeting.
- Participate in continuous improvement initiative / activities.
- Perform any other tasks as assigned.
Tags & Categories
Production Technician (Technician 1)
Becton Dickinson
Production Technician (Technician 1)
Job Description
Job Description Summary
This role is a member of the Shift Team reporting to the Team Leader which supports the manufacturing activities, including operation of molding machines control panel, molding validation, record keeping and housekeeping.Job Description
1) Safety and ISO14001 Environmental accountability. Ensure a safe, healthy and environmentally friendly workplace by observing Company’s rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
2) Safety & health accountability: Safety and health are important to BD and we encourage the observance of all safety programs and training assigned to you. Such programs are to be attended in a timely manner to ensure that work tasks carried out are in accordance to our safety guidelines and SOPs.
3) Good Manufacturing Practice (GMP) accountability. Observing GMP rules and procedures.
4) Apply SOP and/or SWI in daily operations.
5) Observe BD Code of Ethics.
6) Reporting up on all incidents / accidents, near misses, deviations from plan and when required, to take part in further investigations.
7) Operate on machine/process units as assigned.
8) Perform troubleshooting for machine / equipment failures to meet production targets and quality standards and/or specifications.
9) Perform Preventive Maintenance (Cleaning, Service, Replace)
10) While operating on machine to perform tasks, always check and record the machine or process parameters and take containment and corrective actions if necessary to ensure that machine or process is under control.
11) Sampling inspection of parts as per Quality plan to ensure that the products are within specification. If out of specification, handle the disposition of non-conforming products as and when required by the Quality plan.
12) Support Team Leader to execute changes and projects within production area and ensuring compliance to EHS requirements, quality, cost and schedule.
13) Perform product/machine changeover on the line by clearing the previous lot parts, change of materials, tool/die change and minor machine set-up and keying in the necessary information into the machine MES satellite.
14) Coordinate with Manufacturing Assistant on the following tasks:
- Maintain housekeeping and cleaning of machine and work area to ensure neat, tidy and safe working environment.
- Accuracy in update of machine MES satellite e.g. correct component lot numbers, accurate shift output, waste and downtime.
- Manage Material handling activities which include packing/unpacking, loading/unloading.
15) Contribute into departments activities that are needed in order to achieve goals set for the department e.g.
16) Participate in the discussion and review of team's performance in the daily shift changeover meeting.
17) Participate in continuous improvement initiative / activities.
18) Perform any other tasks as assigned.
Required Skills
Optional Skills
.
Primary Work Location
SGP Tuas - Tuas PlantAdditional Locations
Work Shift
SG 12C (Singapore)Locations
- Singapore, South West, Singapore
Salary
36,000 - 54,000 SGD / yearly
Source: ai estimated
* This is an estimated range based on market data and may vary based on experience and qualifications.
Skills Required
- operation of molding machines control panelintermediate
- molding validationintermediate
- record keepingintermediate
- housekeepingintermediate
- observing Company’s rules and proceduresintermediate
- observance of all safety programs and trainingintermediate
- observing GMP rules and proceduresintermediate
- Apply SOP and/or SWI in daily operationsintermediate
- Operate on machine/process unitsintermediate
- Perform troubleshooting for machine / equipment failuresintermediate
- Perform Preventive Maintenance (Cleaning, Service, Replace)intermediate
- check and record the machine or process parametersintermediate
- take containment and corrective actionsintermediate
- Sampling inspection of parts as per Quality planintermediate
- handle the disposition of non-conforming productsintermediate
- execute changes and projects within production areaintermediate
- ensuring compliance to EHS requirementsintermediate
- Perform product/machine changeoverintermediate
- change of materials, tool/die change and minor machine set-upintermediate
- keying in the necessary information into the machine MES satelliteintermediate
- Maintain housekeeping and cleaning of machine and work areaintermediate
- Accuracy in update of machine MES satelliteintermediate
- Manage Material handling activities which include packing/unpacking, loading/unloadingintermediate
- Participate in continuous improvement initiative / activitiesintermediate
Responsibilities
- Safety and ISO14001 Environmental accountability. Ensure a safe, healthy and environmentally friendly workplace by observing Company’s rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
- Safety & health accountability: Safety and health are important to BD and we encourage the observance of all safety programs and training assigned to you. Such programs are to be attended in a timely manner to ensure that work tasks carried out are in accordance to our safety guidelines and SOPs.
- Good Manufacturing Practice (GMP) accountability. Observing GMP rules and procedures.
- Apply SOP and/or SWI in daily operations.
- Observe BD Code of Ethics.
- Reporting up on all incidents / accidents, near misses, deviations from plan and when required, to take part in further investigations.
- Operate on machine/process units as assigned.
- Perform troubleshooting for machine / equipment failures to meet production targets and quality standards and/or specifications.
- Perform Preventive Maintenance (Cleaning, Service, Replace)
- While operating on machine to perform tasks, always check and record the machine or process parameters and take containment and corrective actions if necessary to ensure that machine or process is under control.
- Sampling inspection of parts as per Quality plan to ensure that the products are within specification. If out of specification, handle the disposition of non-conforming products as and when required by the Quality plan.
- Support Team Leader to execute changes and projects within production area and ensuring compliance to EHS requirements, quality, cost and schedule.
- Perform product/machine changeover on the line by clearing the previous lot parts, change of materials, tool/die change and minor machine set-up and keying in the necessary information into the machine MES satellite.
- Coordinate with Manufacturing Assistant on the following tasks:- Maintain housekeeping and cleaning of machine and work area to ensure neat, tidy and safe working environment.- Accuracy in update of machine MES satellite e.g. correct component lot numbers, accurate shift output, waste and downtime.- Manage Material handling activities which include packing/unpacking, loading/unloading.
- Contribute into departments activities that are needed in order to achieve goals set for the department e.g.
- Participate in the discussion and review of team's performance in the daily shift changeover meeting.
- Participate in continuous improvement initiative / activities.
- Perform any other tasks as assigned.
Tags & Categories