Non Destructive Control Testing Inspector
Thales
Non Destructive Control Testing Inspector
Job Description
A Joint Venture between Thales (67%) and Leonardo (33%), Thales Alenia Space is a global space manufacturer delivering, for more than 40 years, high-tech solutions for telecommunications, navigation, Earth Observation, environmental management, exploration, science and orbital infrastructures. Thanks to our diversity of skills, talents and cultures, our customers (governments, institutions, space agencies, telecommunications operators), therefore have Space to Connect, Secure & Defend, Observe & Protect, Explore, Travel & Navigate.
We are looking for a Non Destructive Testing inspector qualified minimum Level 2 as per: ISO 9712, ASNT or EN 4179/NAS 410.
His/her technical and industrial experience, shall ensure:
- Inspection operations of the parts using fixed and/or mobile systems
- Inspection of flight hardware and parts, bonding, sandwich panels, welds, as well inspections of specimens and parts for development and research
- Conducting inspection tests through the use of test procedures
- Preparation of test reporting documents (mostly in English)
- Being able to explain and justify the inspection results, interfaces with Quality, Engineering and support them
- Technological support to Technicians for the development of Integration & Test programs and resources
- Ability to suggest improvements to machinery and inspection processes
- Ability to identifying and defining the best inspection methods to apply to new products
- Developing new standard references to inspect flight hardware, different from the initial one
- Reaching day-to-day objectives and delivering results
- Operational and technical interface towards internal workshops and Quality
- Keeps updated on NDT processes through self-training or internal training in order to maintain qualifications and develop them
- Participation in specific training courses and exams to achieve operational qualifications
English level required:
Able to read, write and speak sufficiently to compile documentation, issuing reports and work instructions, interpret standards and interface with customers and suppliers.
Some of following skills are preferred:
- Qualifications and/or experience in Non-Destructive Testing, in particular in liquid penetrant, radiography, digital radiography, ultrasound and visual methods.
- Experience in Quality Control.
- Knowledge of the main welding processes, manufacturing of Al/Al, Al/CFRP composite panels, cold and hot forming and the main mechanical manufacturing processes.
- The knowledge and ability to apply and interpret codes, regulations, reference standards and parts acceptance criteria.
- Knowledge of technical drawing.
- Knowledge of normal office IT tools (Office) such as Word, Excel, PowerPoint, Project).
Place of work:
Turin (Italy)
Availability to medium-short trips (some days or weeks) in Italy, Europe and overseas
(USA mainly) is mandatory
Other characteristics:
Availability to occasionally work 3 shifts
Predisposition to team work, also beyond own specific perimeter and formal roles
Used to work by objectives
Quality-oriented mindset
Stretched towards continuous technological growth and improvement
At Thales Alenia Space we provide CAREERS and not only jobs. With Thales Alenia Space employing around 8,900 employees in 10 countries with 17 sites in Europe and a plant in the US, our mobility policy enables employees each year to develop their careers at home and abroad. Thales Alenia Space sees space as a new horizon, helping to build a better, more sustainable life on Earth #SpaceForLife. Great journeys start here, apply now!Locations
- Torino, Torino, Torino 10146
Salary
Estimated Salary Rangemedium confidence
35,000 - 50,000 EUR / yearly
Source: ai estimated
* This is an estimated range based on market data and may vary based on experience and qualifications.
Skills Required
- NDT inspection operationsintermediate
- Use of fixed and mobile NDT systemsintermediate
- Test procedure executionintermediate
- Report preparation in Englishintermediate
- Result explanation and justificationintermediate
- Technical support to techniciansintermediate
- Process improvement suggestionintermediate
- Inspection method selectionintermediate
- Standard reference developmentintermediate
- Team work predispositionintermediate
- Quality-oriented mindsetintermediate
- Continuous technological improvementintermediate
- Knowledge of codes, regulations, standards and acceptance criteriaintermediate
- Self-training and qualification maintenanceintermediate
Required Qualifications
- Non Destructive Testing inspector qualified minimum Level 2 as per ISO 9712, ASNT or EN 4179/NAS 410 (experience)
- Technical and industrial experience in NDT inspections (experience)
- Able to read, write and speak English sufficiently to compile documentation, issue reports, interpret standards and interface with customers/suppliers (experience)
- Availability to medium-short trips in Italy, Europe and overseas (USA mainly) (experience)
- Availability to occasionally work 3 shifts (experience)
Preferred Qualifications
- Qualifications and/or experience in liquid penetrant, radiography, digital radiography, ultrasound and visual methods (experience)
- Experience in Quality Control (experience)
- Knowledge of main welding processes, manufacturing of Al/Al, Al/CFRP composite panels, cold and hot forming and mechanical processes (experience)
- Knowledge of technical drawing (experience)
- Knowledge of office IT tools (Word, Excel, PowerPoint, Project) (experience)
Responsibilities
- Inspection operations of parts using fixed and/or mobile systems
- Inspection of flight hardware, parts, bonding, sandwich panels, welds, specimens for development and research
- Conducting inspection tests through test procedures
- Preparation of test reporting documents (mostly in English)
- Explain and justify inspection results, interface with Quality and Engineering
- Technological support to Technicians for Integration & Test programs
- Suggest improvements to machinery and inspection processes
- Identify and define best inspection methods for new products
- Develop new standard references for flight hardware inspections
- Operational and technical interface towards internal workshops and Quality
Benefits
- general: Careers and not only jobs with mobility policy for development at home and abroad
- general: Employed in a global company with 8,900 employees in 10 countries
- general: Opportunity for self-training, internal training and specific courses to maintain and develop qualifications
- general: Part of a company contributing to sustainable life on Earth (#SpaceForLife)
Tags & Categories
Answer 10 quick questions to check your fit for Non Destructive Control Testing Inspector @ Thales.
10 Questions
~2 Minutes
Instant Score
Related Books and Jobs
Non Destructive Control Testing Inspector
Thales
Non Destructive Control Testing Inspector
Job Description
A Joint Venture between Thales (67%) and Leonardo (33%), Thales Alenia Space is a global space manufacturer delivering, for more than 40 years, high-tech solutions for telecommunications, navigation, Earth Observation, environmental management, exploration, science and orbital infrastructures. Thanks to our diversity of skills, talents and cultures, our customers (governments, institutions, space agencies, telecommunications operators), therefore have Space to Connect, Secure & Defend, Observe & Protect, Explore, Travel & Navigate.
We are looking for a Non Destructive Testing inspector qualified minimum Level 2 as per: ISO 9712, ASNT or EN 4179/NAS 410.
His/her technical and industrial experience, shall ensure:
- Inspection operations of the parts using fixed and/or mobile systems
- Inspection of flight hardware and parts, bonding, sandwich panels, welds, as well inspections of specimens and parts for development and research
- Conducting inspection tests through the use of test procedures
- Preparation of test reporting documents (mostly in English)
- Being able to explain and justify the inspection results, interfaces with Quality, Engineering and support them
- Technological support to Technicians for the development of Integration & Test programs and resources
- Ability to suggest improvements to machinery and inspection processes
- Ability to identifying and defining the best inspection methods to apply to new products
- Developing new standard references to inspect flight hardware, different from the initial one
- Reaching day-to-day objectives and delivering results
- Operational and technical interface towards internal workshops and Quality
- Keeps updated on NDT processes through self-training or internal training in order to maintain qualifications and develop them
- Participation in specific training courses and exams to achieve operational qualifications
English level required:
Able to read, write and speak sufficiently to compile documentation, issuing reports and work instructions, interpret standards and interface with customers and suppliers.
Some of following skills are preferred:
- Qualifications and/or experience in Non-Destructive Testing, in particular in liquid penetrant, radiography, digital radiography, ultrasound and visual methods.
- Experience in Quality Control.
- Knowledge of the main welding processes, manufacturing of Al/Al, Al/CFRP composite panels, cold and hot forming and the main mechanical manufacturing processes.
- The knowledge and ability to apply and interpret codes, regulations, reference standards and parts acceptance criteria.
- Knowledge of technical drawing.
- Knowledge of normal office IT tools (Office) such as Word, Excel, PowerPoint, Project).
Place of work:
Turin (Italy)
Availability to medium-short trips (some days or weeks) in Italy, Europe and overseas
(USA mainly) is mandatory
Other characteristics:
Availability to occasionally work 3 shifts
Predisposition to team work, also beyond own specific perimeter and formal roles
Used to work by objectives
Quality-oriented mindset
Stretched towards continuous technological growth and improvement
At Thales Alenia Space we provide CAREERS and not only jobs. With Thales Alenia Space employing around 8,900 employees in 10 countries with 17 sites in Europe and a plant in the US, our mobility policy enables employees each year to develop their careers at home and abroad. Thales Alenia Space sees space as a new horizon, helping to build a better, more sustainable life on Earth #SpaceForLife. Great journeys start here, apply now!Locations
- Torino, Torino, Torino 10146
Salary
Estimated Salary Rangemedium confidence
35,000 - 50,000 EUR / yearly
Source: ai estimated
* This is an estimated range based on market data and may vary based on experience and qualifications.
Skills Required
- NDT inspection operationsintermediate
- Use of fixed and mobile NDT systemsintermediate
- Test procedure executionintermediate
- Report preparation in Englishintermediate
- Result explanation and justificationintermediate
- Technical support to techniciansintermediate
- Process improvement suggestionintermediate
- Inspection method selectionintermediate
- Standard reference developmentintermediate
- Team work predispositionintermediate
- Quality-oriented mindsetintermediate
- Continuous technological improvementintermediate
- Knowledge of codes, regulations, standards and acceptance criteriaintermediate
- Self-training and qualification maintenanceintermediate
Required Qualifications
- Non Destructive Testing inspector qualified minimum Level 2 as per ISO 9712, ASNT or EN 4179/NAS 410 (experience)
- Technical and industrial experience in NDT inspections (experience)
- Able to read, write and speak English sufficiently to compile documentation, issue reports, interpret standards and interface with customers/suppliers (experience)
- Availability to medium-short trips in Italy, Europe and overseas (USA mainly) (experience)
- Availability to occasionally work 3 shifts (experience)
Preferred Qualifications
- Qualifications and/or experience in liquid penetrant, radiography, digital radiography, ultrasound and visual methods (experience)
- Experience in Quality Control (experience)
- Knowledge of main welding processes, manufacturing of Al/Al, Al/CFRP composite panels, cold and hot forming and mechanical processes (experience)
- Knowledge of technical drawing (experience)
- Knowledge of office IT tools (Word, Excel, PowerPoint, Project) (experience)
Responsibilities
- Inspection operations of parts using fixed and/or mobile systems
- Inspection of flight hardware, parts, bonding, sandwich panels, welds, specimens for development and research
- Conducting inspection tests through test procedures
- Preparation of test reporting documents (mostly in English)
- Explain and justify inspection results, interface with Quality and Engineering
- Technological support to Technicians for Integration & Test programs
- Suggest improvements to machinery and inspection processes
- Identify and define best inspection methods for new products
- Develop new standard references for flight hardware inspections
- Operational and technical interface towards internal workshops and Quality
Benefits
- general: Careers and not only jobs with mobility policy for development at home and abroad
- general: Employed in a global company with 8,900 employees in 10 countries
- general: Opportunity for self-training, internal training and specific courses to maintain and develop qualifications
- general: Part of a company contributing to sustainable life on Earth (#SpaceForLife)
Tags & Categories
Answer 10 quick questions to check your fit for Non Destructive Control Testing Inspector @ Thales.
10 Questions
~2 Minutes
Instant Score
Related Books and Jobs